5 Best RC Body Clips In 2026

As an Amazon Associate we earn from qualifying purchases.

If you own a radio-controlled car, you may have noticed that the plastic body can come loose after a rough run. Body clips are the small pins that hold the shell firmly to the chassis. This guide is for beginners who want to find the best RC body clips without knowing much about the hobby yet.

The five products below share a few things in common. Each one is a set of metal pins, most with pull tabs, sized to fit common RC car scales. This comparison rests on the listed features and typical use, not on personal testing.

Finding the Best RC Body Clips for Your Car: Five Options Reviewed

Each review below covers what the product is, who it suits, and how it compares on fit, ease of use and value. Read the size details carefully before buying, since body clips must match your car’s scale and mounting posts.

1. 50pcs RC Body Clips: best for a small starter pack

What it is and who it suits

This is a set of 50 stainless steel body pins with separate pull tabs. The pins are about 24 mm long and 1 mm wide. The listing says they fit many 1/8, 1/10 and 1/12 scale models, so this set suits owners of mid-sized trucks and buggies.

Best use cases

The pins work well for body posts, fenders and battery brackets. A 50-piece count is enough to replace a few lost clips or outfit one car. It is a practical choice when you want a simple replacement set.

Key features in plain words

The curved end helps you push the pin into the post and pull it out again. Stainless steel resists rust better than plain steel, which matters if you drive in damp grass or mud. The pins arrive unassembled, so you attach the tabs yourself.

Everyday feel

In daily use, clips like these tend to be a quick swap rather than a big job. The unassembled tabs add a small step at the start. Most owners find the work takes only a few minutes once they have the rhythm.

Performance and ease of use

The clips hold the body firmly when seated fully. Because the pins are thin, you should check that the post diameter matches before ordering. Ease of use is good for a beginner who is comfortable with small parts.

Value for money

At the listed price, the set offers a reasonable number of pieces for a single car. The seller is described as moderate in standing, so it is wise to check recent buyer comments before purchasing.

Pros

• Stainless steel resists corrosion
• Curved ends make installing and removing easier
• Good number of pieces for one or two cars
• Sized for several popular scales

Cons

• Pull tabs must be assembled by hand
• Thin pins may not suit every post size
• Seller standing is only moderate

2. 100pcs Universal RC Body Clips Pins: best for a large silver set

What it is and who it suits

This is a larger set of 100 silver body pins. The listing names a long list of brands, including Traxxas, Arrma, HSP and Axial, and says the pins suit most 1/8, 1/10 and 1/12 scale cars, trucks and crawlers. It suits owners with several vehicles or those who lose clips often.

Best use cases

The clips are meant for body pillars, wings and battery brackets. Because you get 100 pieces, you can keep spares in a case at the track or in the garage. This makes it a sensible bulk option.

Key features in plain words

The bend end design makes the pins easier to remove and install, according to the listing. The body of the clip stays fastened to the post during rough runs, as the listing notes. The steel is described as durable and not easily corroded, which suits a car that sees dirt and moisture.

Everyday feel

Because these pins arrive ready to use, there is no tab assembly step. That makes daily swaps simple, especially when you are working at the track. Many owners prefer this when they want to keep moving.

Performance and ease of use

The bend end helps the pins seat cleanly on the post. Like any clip, the grip depends on how well the pin matches the post. Ease of use is strong for beginners, since the process is mostly push and pull.

Value for money

At the listed price, you receive a large count of pieces, which lowers the cost per clip. This is useful for a fleet or for a long spare supply. The seller standing is moderate, so reading recent comments is still a good idea.

Pros

• Large count of 100 pieces
• Bend end design aids installation and removal
• Steel described as durable and corrosion resistant
• Wide list of compatible brands

Cons

• No pull tabs are included in this set
• The listing gives no exact dimensions
• Seller standing is only moderate

3. 105pcs ZQToday Universal RC Body Clips: best for a big black set

What it is and who it suits

This set includes 105 black body pins, each listed at about 25 mm long and 1.2 mm in diameter. The listing says they suit 1/8, 1/10 and 1/12 scale models. It is a good fit for people who want the largest count among these options.

Best use cases

The pins are described for body pillars, fenders and battery brackets. With 105 pieces, you have plenty for several cars or for a long stretch between restocks. It also works as a backup kit in a toolbox.

Key features in plain words

The curved end is meant to make the clip easier to install and remove. The thicker 1.2 mm diameter may hold a post a little more snugly than thinner pins. Stainless steel construction is listed as well.

Everyday feel

Clips like these usually feel firm in use, and the black finish blends in well with dark bodies. Swapping a few pins during a session is easy. The main effort is simply finding the right spot to press each one in.

Performance and ease of use

The listing gives a clear length and diameter, which helps with fit checks. The curved end supports a straightforward install. Beginners will find the process familiar if they have handled other clip styles.

Value for money

Few sets give you more pieces for a similar price, so the value per clip is strong. The count is generous for owners who expect to lose parts. As always, the seller is moderate in standing, so check feedback first.

Pros

• One of the largest counts in this list
• Clear size details in the listing
• Curved end design for simpler installation
• Black finish suits many body colours

Cons

• No pull tabs are included
• The thicker diameter may not suit every post
• Seller standing is only moderate

4. ZQToday 60PCS 1mm RC Body Clips: best for smaller scale cars

What it is and who it suits

This set has 60 pins, each about 20 mm long and 1 mm wide, with pull tabs already assembled. The listing targets 1/12, 1/14, 1/16 and 1/18 scale models, along with some smaller vehicles. It suits owners of compact and mini RC cars rather than large trucks.

Best use cases

The short, thin pins suit tight posts on smaller bodies. The listing also names several smaller brands and such as MJX Hyper Go, HBX and Wltoys. Because the pins are shorter, they fit the tighter mounting points found on these compact bodies.

The set is a practical choice for keeping a mini car running without searching for replacements.

Key features in plain words

The pull tabs come already attached, so you can start using the clips straight out of the package. The curved end makes the pins easier to press in and pull out.

Stainless steel is listed for corrosion resistance and durability.

Everyday feel

Working with pins this small takes a steady hand, especially on a crowded chassis. Once seated, they stay put through normal driving. Owners of small cars often value the assembled tabs because they save time at the bench.

Performance and ease of use

The pins hold the body well when the post size matches. Because they are thinner and shorter, you should confirm that your car’s posts are the right scale before buying. The assembled tabs make setup easier than unassembled sets.

Value for money

At the listed price, you receive 60 pins with tabs already fitted, which is convenient. The set is well suited to mini-car owners who need a specific size. The seller standing is moderate, so reading recent buyer comments is a sensible step.

Pros

• Pull tabs come pre-assembled
• Sized for smaller 1/12 to 1/18 scale models
• Lists compatibility with many mini-car brands
• Stainless steel construction

Cons

• Not suited to larger 1/8 or 1/10 scale cars
• Thin pins may feel less grippy on some posts
• Seller standing is only moderate

5. 60PCS ZQToday Universal RC Body Clips: best for mid-sized cars with tabs

What it is and who it suits

This set offers 60 black pins, each about 25 mm long and 1.2 mm in diameter, with pull tabs already assembled. The listing says they suit 1/8, 1/10 and 1/12 scale cars and trucks. It fits owners who want ready-to-use clips for standard-sized models.

Best use cases

The clips work on body pillars, fenders and battery brackets, according to the listing. Pre-assembled tabs make them handy for quick repairs at the track. A 60-piece count covers a single car plus a few spares.

Key features in plain words

The curved end design supports easy installation and removal. The 1.2 mm diameter gives a firm feel on the post. The listing also says the pins are stainless steel, which helps resist rust.

Everyday feel

Clips with pre-fitted tabs save the small task of attaching them yourself. In regular use, the process is just press, seat and go. That simplicity appeals to beginners who would rather not handle extra parts.

Performance and ease of use

The listing gives clear length and diameter figures, which makes fit checks straightforward. The pins seat firmly when the post matches the diameter. Ease of use is good, with the assembled tabs being the main convenience.

Value for money

The price matches the 105-piece black set from the same brand, but this version includes assembled tabs and a smaller count. That trade-off suits owners who value convenience over quantity. Seller standing is moderate, so check feedback before ordering.

Pros

• Pull tabs arrive already assembled
• Clear size details for easy fit checks
• Curved end design simplifies installation
• Stainless steel construction

Cons

• Smaller count than some competing sets
• Thicker pins may not suit every post
• Seller standing is only moderate

Comparison Insights: How the Five Sets Differ

The five sets share a basic design, but they differ in count in count, scale, tab style and finish. Those differences matter more than the marketing words on the listings. Use the table as a quick reference, then match the details to your car.

Performance differences

Pin diameter and length shape how firmly each clip grips. The thicker 1.2 mm pins may hold a post more snugly, while the 1 mm pins suit tighter, smaller mountings. Neither is better across the board, since the right choice depends on your post.

Finish also plays a part. Black and silver pins look different on a body, though the listings do not claim any difference in strength. Choose the finish you prefer and focus on size fit.

Ease of use differences

Pre-assembled tabs save time, so the 60-piece sets from ZQToday are the simplest to start with. The 50-piece set and the 105-piece set need you to attach tabs before use. For a beginner, pre-assembled tabs reduce small mistakes.

Curved ends appear on most sets, which helps with both installing and removing pins. The 100-piece silver set uses a bend end design that the listing describes in similar terms. In practice, all five are straightforward once you know the pressing angle.

Value for money differences

Counts vary a lot, from 50 to 105 pieces. Larger sets lower the cost per clip, which suits owners with several cars or a habit of losing parts. Smaller sets make sense if you only need a few replacements.

Pre-assembled tabs add some convenience, which many buyers consider worth a little extra. Because all five sets are listed at similar prices, the count and tab style often decide the value. Compare the piece total against how many you realistically need.

Buying Guide: Key Factors for Picking RC Body Clips

Body clips are small, but a poor fit can cause a body to rattle or fly off mid-run. Knowing a few basic factors helps you buy with confidence. The points below are written for beginners.

Match the scale of your car

RC cars come in scales such as 1/8, 1/10, 1/12, 1/14, 1/16 and 1/18. The number tells you how small the model is compared with the real vehicle. Check your car’s scale before buying, since clips are sized to suit specific ranges.

Smaller scales usually need shorter, thinner pins. Larger scales often use longer, thicker pins. Matching the scale prevents clips that are too loose or too tight.

Check the post and pin size

Each body post has a set diameter, and each pin must suit it. Length matters too, because a pin that is too short will not seat properly. Compare the listed dimensions with your car’s mounting points.

If you are unsure, measure a spare pin from your car. Bring the measurement into your buying decision. This small check saves time and frustration.

Understand pull tabs

Pull tabs are the small loops or handles that let you grip and pull the pin out. Some sets arrive with tabs already attached. Others leave you to assemble them, which takes a few extra minutes.

Pre-assembled tabs suit beginners who want quick use. Unassembled tabs are fine if you enjoy hands-on work. Either style works once installed correctly.

Consider the material and finish

Stainless steel resists rust better than plain steel. That matters if you drive in wet grass, mud or puddles. Several listings in this round-up describe their pins as stainless steel.

Finish is mostly a matter of looks. Black pins blend into dark bodies, while silver pins stand out a little more. Pick the colour that suits your model.

Think about how many you need

A small set of 50 to 60 pieces covers one car and a few spares. Larger sets of 100 or more suit multiple vehicles or frequent losses. Think about your own habits before deciding.

Buying a larger count can lower the cost per clip. Still, you only gain value if you actually use the extras. Balance the count against your needs.

Check seller feedback

Every product here has a moderate seller standing, as described in the data. That means it is worth reading recent buyer comments before purchase. Look for notes about fit, quality and delivery.

Look for comments that mention the right scale, post fit and if the pins arrived as described. Honest feedback like this often reveals more than the listing itself. Take a few minutes to read it before you order.

Who Should Buy These Products: Matching Buyers to a Set

Different owners need different things from a body clip set. Some want a big supply, while others only need a few specific pins. The notes below match common buyer types to the most suitable option in this round-up.

The beginner with one small car

If you have a compact 1/12 to 1/18 scale car, the 60PCS ZQToday 1mm set is a good place to start. The tabs come pre-assembled, which saves a step. Its shorter pins suit smaller mountings.

Check the scale and post size first, since this set is not made for larger models.

The owner with a mid-sized truck or buggy

For 1/8, 1/10 or 1/12 scale vehicles, the 60PCS ZQToday Universal set with pre-assembled tabs is a convenient pick. It offers clear dimensions and firm grip. The 50pcs RC Body Clips set is a reasonable alternative if you prefer to assemble tabs yourself.

Both suit one car and a few spares well.

The collector or multi-car owner

If you run several vehicles or lose clips often, the 105pcs ZQToday black set gives the largest count here. The 100pcs silver set is another strong option for a big supply. Both keep spares on hand for the whole fleet.

Because neither includes pull tabs, plan to source those separately if you need them.

The owner who wants a quick track-side fix

For fast repairs away from home, pre-assembled tabs help. The 60-piece ZQToday sets arrive ready to use, so you can swap a pin in seconds. Keeping a small pack in your kit bag is a sensible habit.

Choose the size that matches your car so the spares actually fit.

Final Verdict: Which Set Makes Sense

There is no single winner for every owner, because the best choice depends on scale, count and tab style. Each set in this round-up has a clear role. The right pick is the one that fits your car and your habits.

For small cars, the 60PCS ZQToday 1mm set stands out for its pre-assembled tabs and compact sizing. For mid-sized models, the 60PCS ZQToday Universal set is a convenient, ready-to-use option. Owners who need a large supply will find the 100pcs and 105pcs sets practical.

Before buying, confirm your car’s scale and post size, and read recent buyer comments since every seller here is described as moderate. A careful check now helps the clips hold your body firmly on every run.

Frequently Asked Questions

What are RC body clips?

RC body clips are small pins that hold the plastic body of a radio-controlled car to its chassis. They push into mounting posts and keep the shell in place. Most sets include pull tabs that help you remove them.

How do I know which size to buy?

Check your car’s scale, such as 1/8, 1/10, 1/12, 1/14, 1/16 or 1/18. Then compare the pin length and diameter with your body posts. Measuring a spare pin from your car is a simple way to confirm fit.

Do I need pull tabs with my clips?

Pull tabs are not strictly required, but they make removing pins much easier. Some sets include tabs that are already attached, while others need you to assemble them. Choose the style that suits your comfort with small parts.

Why does stainless steel matter for body clips?

Stainless steel resists rust better than plain steel. That helps when your car runs in wet grass, mud or puddles. Several of the sets in this guide describe their pins as stainless steel.

Can one set of clips work on different RC cars?

Some sets are listed as universal and suit many scales and brands. Even so, the pin size must match your car’s posts, so a universal label does not guarantee a perfect fit. Always compare the listed dimensions before buying.